Building Your Own DIY Computer Gaming Desk
Table of Contents
If you’re a PC gamer, you love your machine or rig. It’s not just something you can use to do work, but also a place to do gaming. At that, you can likely do games at resolutions and frames per second that console players can only dream of if they even know what’s possible. Unfortunately, if you’ve got a traditional chair and desk, then the more time you spend doing your PC gaming, the more you’re creating physical problems for yourself with the positions you’re staying in during all those hours of fragging and grinding. Building your own DIY computer gaming desk, and maybe even some serious money savings along the way.
What You Need
The number of ways you can go about building your own desk are seemingly infinite. If you’ve done a Pinterest search, then you already know this. However, as a gamer, you have four specific criteria you should be mindful of.
Most of the retail desks you find in stores are only 60 inches in length, if not less. If you have a wide spread of gear to house, then you might need 80 inches or better. A triple-monitor setup with a good speaker distribution eats up a lot of real estate. Also, a DIY gaming desk means you can use a piece of custom or reclaimed wood you like and find as the table surface of your desk.
You’ll shave hundreds of dollars off the cost of a desk if you build it yourself. While there are suggestions for new parts you might get at Ikea or other retailers, you can sometimes substitute things you find at second-hand stores, reclaim from older pieces of furniture, or even find at flea markets. A good rule of thumb is a few hundred dollars for your total budget, but if you have things already laying around or find some good deals, then you might do it all for less than half of that. That’s a lot less than retail desks that aren’t even this big.
You don’t have to be a woodworking pro to use the components listed here. With that knowledge and the right tools, you could make a whole desk from a single sheet of something like plywood, but you’d rather spend your free time gaming than being a carpenter, wouldn’t you?
There are gaming, but too many are using writing desks with a monitor on top as a gaming desk. That wreaks havoc on their bodies even when they’re trying to wreak havoc on the other players or teams they are trying to battle.
Components You Should Consider
The components listed in this section can be found at most IKEA stores, although you might have equivalents sitting around your home, closet, basement, attic, or garage. You can also check out second-hand stores, home improvement or hardware stores, and even flea markets or swap meets for parts, You might even check out Freecycle or local listings for used furniture someone might throw out so you can find parts you repurpose. Be sure you get enough screws or framed bolts to put it all together.
Ekby Alex Storage Box: This might seem steep at $55, but it’s a great place for putting speakers and even a monitor.
Linmon Table: Retailing for around $25, you can have a sturdy surface that’s in reality cheaper than the glossy white finish might make it look like. Of course any surface you find can serve as your table top, and this will prominently set or clash with the decor of the room it’s in.
This only costs you $10, but once you bolt it underneath the top of your table, you’ll have a wire-free desk, which is priceless.
Summera Sling: This is something that can help you cradle your PC off the ground so it’s less likely to get kicked over or collect dust. It also makes it much easier to clean and dust the area and have more foot room to spread out.
Vika Kaj Adjustable Legs: These can get extended to various heights, which really helps you find your ergonomic comfort zone and match your dream gaming chair. Plus, they only cost roughly $15 a piece.
Gaming Monitor Height
When you sit upright, the horizontal level of your eyes need be just above or even right at roughly one-quarter of your monitor or monitors. If at all possible, tilt your monitors just slightly backwards. Monitors in this kind of position help minimize movements in your neck, limiting how much you need to use your upper neck muscles in order to look up. Numerous studies have down that optimal viewing angles range from 20 to 50 degrees.
Placing monitors like this means that monitor’s most active areas provide the least amount of visual strain. You should also keep your monitor a minimum of one arm-length away, although there can be some give or take for your hands in terms of the placement of your keyboard. It’s generally considered good to sit farther back, but if you can’t even see your own avatar or read your HUD, then it’s obviously no good.
Place your monitors at the height that stays aligned with the natural posture of your neck. Keep in mind that this isn’t your posture when you’re naturally slouching but when your chin is up, stomach is in, and shoulders are back. An average human head weighs 11 pounds and makes up 7 percent of the total physical mass. That’s a lot for your neck to carry all the time, and angling it for long periods of time will wear you down and even injure you.
Any sport has injuries in it, and PC gaming isn’t any different, despite the seated nature of it. Building your own DIY computer gaming desk can let you set up what’s right for your body and hardware, and the money you save in the process might be all the more you can spend on your cushy, comfy dream ergonomic gaming chair. That will all support your neck, hands, and back during your long gaming sessions. Just be sure your keyboard and monitors match the healthy setup.